Decalin
C10H18, 138.254 g/mol. Its structure, the values that were measured, the values that were calculated, and where each one came from.
Identifiers
- Molecular formula
- C₁₀H₁₈
- Molecular weight
- 138.254 g/mol
- Exact mass
- 138.140851 g/mol
- C1CCC2CCCCC2C1
- InChI=1S/C10H18/c1-2-6-10-8-4-3-7-9(10)5-1/h9-10H,1-8H2
- NNBZCPXTIHJBJL-UHFFFAOYSA-N
Measured properties
Values somebody obtained from a sample and published. Where two sources report the same property they are both shown, in the units each used — a disagreement between them is information, and averaging it away would be inventing a number neither one gave.
- Boiling Point
- 383 °F at 760 mmHg (USCG, 1999)
- 155.5 °C
- 185-195 °C
- 155.5 °C @760 [mm Hg]
- Melting Point
- -44 °F (USCG, 1999)
- -43 °C
- -40 °C
- -43 °C
- Flash Point
- 134 °F (USCG, 1999)
- 134 deg. F
- 129 °F; 54 °C (Closed cup) /Trans-isomer/
- 136 °F; 58 °C (CLOSED CUP)
- 57 °C c.c.
- Solubility
- Very sol in alcohol, methanol, ether, chloroform. Miscible with propyl and isopropyl alcohol; miscible with most ketones and esters.
- In water, 0.889 mg/l @ 25 °C
- Solubility in water at 25 °C: very poor
- Density
- 0.89 at 68 °F (USCG, 1999) - Less dense than water; will float
- 0.8965 @ 22 °C
- Vapor density: 4.77 (air= 1) /Trans-isomer/
- Liquid water interfacial tension: 51.5 dynes/cm= 0.0515 N/m at 20 °C; liquid heat capacity= 0.391 BTU/lb-deg F @ 70 °F; liquid thermal conductivity= 0.735 BTU-in/hr-sq ft-deg F at 135 °C; saturated vapor density= 0.00269 lb/cu ft @ 130 °F
- Relative density (water = 1): 0.87-0.90
- 0.8965 @ 22°C
- Vapor Pressure
- 2.3 [mmHg]
- 1.22 [mmHg]
- 0.78 [mmHg]
- VP: 1 mm Hg @ 22.5 °C /cis-Form/
- VP: 10 mm Hg @ 47.2 °C /trans-Form/
- 2.3 mm Hg @ 25 °C
- Vapor pressure, Pa at 20 °C: 127
- 2.3 [mm Hg] @25 °C
- LogP
- 4.6
- Viscosity
- 1.788 cP @ 70 °F
Calculated properties
Derived from the structure rather than from a sample. These are reproducible and they are not measurements: a calculated partition coefficient and a measured one can differ by a long way, and where both exist they are listed apart on purpose.
- logP
- 3.3668
- Topological polar surface area
- 0 Ų
- H-bond donors
- 0
- H-bond acceptors
- 0
- Rotatable bonds
- 0
- Molar refractivity
- 43.916 cm³/mol
- Fraction sp³ carbons
- 1
- QED drug-likeness
- 0.4812
What it is made of
Elements
Structure
- Heavy atoms, hydrogen excluded
- 10
- Total atoms, hydrogen included
- 28
- Rings
- 2
- Aromatic rings
- 0
- Stereocentres
- 2
- Formal charge
- 0
The molecule in three dimensions
The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.
Reactions it appears in
Other names for it
The sources also call it DECAHYDRONAPHTHALENE, Naphthan, Dekalin, Perhydronaphthalene, Naphthalene, decahydro-, Naphthalane, Naphthane, Dekalina, Bicyclo[4.4.0]decane, Decahydronaphthalin, Bicyclo(4.4.0)decane, cis-Decahydronaphthalene.
Structurally related
Seen alongside it in reaction records
Molecules that appear in the same recorded reactions as Decalin. This says nothing about structure: most of them are the bases, solvents, ligands and catalysts the chemistry needed, and they are here because somebody put them in the same flask.
Where these values came from
chemistry engine
What this page does not claim
The identifiers are what the source record holds, copied rather than recomputed. Measured values are reported as their source gave them, units and all; calculated values are marked as calculated and are not measurements. Where a field is absent the page says so, because a blank cell reads as a zero and a guessed value reads as a fact.
Nothing here is a hazard assessment, a purity statement or advice about handling a sample. A flash point quoted from a safety database is a number somebody published, not a judgement by us about whether this molecule is safe for what you intend.