Diallyl Disulfide

An alkene, C6H10S2, 146.28 g/mol. Boiling point 79 °C @ 16 MM HG, density 1.010 @ 15 °C, as published.

verified recordOrganic — alkene5 measured properties

Identifiers

Molecular formula: C₆H₁₀S₂
Molecular weight: 146.28 g/mol
Exact mass: 146.022392 g/mol
IUPAC name: 3-(prop-2-enyldisulfanyl)prop-1-ene
SMILES: C=CCSSCC=C
InChI: InChI=1S/C6H10S2/c1-3-5-7-8-6-4-2/h3-4H,1-2,5-6H2
InChIKey: PFRGXCVKLLPLIP-UHFFFAOYSA-N

Open in ReactionLens Use in reaction prediction

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point: 79 °C @ 16 MM HGmeasured · Hazardous Substances Data Bank (HSDB); 138.00 to 139.00 °C. @ 760.00 mm Hgmeasured · Human Metabolome Database (HMDB)
Density: 1.010 @ 15 °Cmeasured · Hazardous Substances Data Bank (HSDB); 0.998-1.015measured · Joint FAO/WHO Expert Committee on Food Additives (JECFA)
Solubility: INSOL IN WATER; SOL IN MOST COMMON ORG SOLVENTSmeasured · Hazardous Substances Data Bank (HSDB); insoluble in water; soluble in common organic solventsmeasured · Joint FAO/WHO Expert Committee on Food Additives (JECFA)
Vapor Pressure: 1.0 [mmHg]measured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
Refractive Index: INDEX OF REFRACTION: 1.54 @ 20 °Cmeasured · Fenaroli's Handbook of Flavor Ingredients. Volume 2. Edited, translated, and revised by T.E. Furia and N. Bellanca. 2nd ed. Cleveland: The Chemical Rubber Co., 1975., p. 17; 1.537-1.551measured · reference compound database

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight: 146.3 g/molcalculated · reference compound database; Average mass of one molecule, from reference compound database.
Exact mass: 146.02239267 Dacalculated · reference compound database; Mass of the most common isotopic form.
XLogP3: 2.2calculated · reference compound database; Estimated oil/water partition, computed by reference compound database.
Polar surface area: 50.6 Å²calculated · reference compound database; Polar surface area as computed by reference compound database.
Complexity: 58calculated · reference compound database; A rough measure of how intricate the structure is.
H-bond donors: 0calculated · reference compound database
H-bond acceptors: 2calculated · reference compound database
logP: 2.7398calculated · chemistry engine; Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area: 0 Å²calculated · chemistry engine; Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors: 0calculated · chemistry engine; Atoms that can donate a hydrogen bond.
H-bond acceptors: 2calculated · chemistry engine; Atoms that can accept a hydrogen bond.
Rotatable bonds: 5calculated · chemistry engine; Single bonds the molecule can freely twist around.
Molar refractivity: 45.31 cm³/molcalculated · chemistry engine; Relates to the molecule's polarisability.
Fraction sp³ carbons: 0.3333calculated · chemistry engine; Share of carbon atoms with tetrahedral bonding.
QED drug-likeness: 0.3321calculated · chemistry engine; Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

C Carbon6 atoms · 49.3% by mass
S Sulfur2 atoms · 43.8% by mass
H Hydrogen10 atoms · 6.9% by mass

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded: 8
Total atoms, hydrogen included: 18
Rings: 0
Aromatic rings: 0
Stereocentres: 0
Formal charge: 0

Functional groups

Alkene
A carbon–carbon double bond.

Matched by structural pattern, not by a measurement.

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Diallyl Disulfide yet.

Other names for it

The systematic name on this record is 3-(prop-2-enyldisulfanyl)prop-1-ene.

The sources also call it Allyl disulfide, Diallyldisulfide, Diallyl disulphide, Disulfide, di-2-propenyl, Allyl disulphide, 2-Propenyl disulphide, 4,5-Dithia-1,7-octadiene, 2-Propenyl disulfide, 3-(prop-2-enyldisulfanyl)prop-1-ene, FEMA No. 2028, DTXSID9035206.

Structurally related

Nothing structurally close to Diallyl Disulfide has a page here yet.

Where these values came from

reference compound database16590
compound record
chemistry engine
structure perception

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.