Skip to the content
Browse the library

Dimethyl-p-toluidine

An aromatic amine, C9H13N, 135.21 g/mol. Boiling point 211 °C, density 0.9366 g/cu cm at 20 °C, as published.

verified record, Organic — aromatic amine, 7 measured properties

Identifiers

Molecular formula
C₉H₁₃N
Molecular weight
135.21 g/mol
Exact mass
135.104799 g/mol
IUPAC name
N,N,4-trimethylaniline
SMILES
Cc1ccc(N(C)C)cc1
InChI
InChI=1S/C9H13N/c1-8-4-6-9(7-5-8)10(2)3/h4-7H,1-3H3
InChIKey
GYVGXEWAOAAJEU-UHFFFAOYSA-N

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point
211 °Cmeasured · Hazardous Substances Data Bank (HSDB)
215 °Cmeasured · ILO-WHO International Chemical Safety Cards (ICSCs)
Density
0.9366 g/cu cm at 20 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Relative density (water = 1): 0.9measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Solubility
In water, 455 mg/Lmeasured · Hazardous Substances Data Bank (HSDB)
In water, 650 mg/L at 37 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure
0.17 [mmHg]measured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
0.178 mm Hg at 25 °Cmeasured · Hazardous Substances Data Bank (HSDB)
LogP
log Kow = 2.81measured · Hazardous Substances Data Bank (HSDB)
2.61measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Flash Point
76 °C (closed cup)measured · Hazardous Substances Data Bank (HSDB)
83 °Cmeasured · ILO-WHO International Chemical Safety Cards (ICSCs)
Refractive Index
Index of refraction: 1.5366 at 20 °C/Dmeasured · Lide, D.R., G.W.A. Milne (eds.). Handbook of Data on Organic Compounds. Volume I. 3rd ed. CRC Press, Inc. Boca Raton ,FL. 1994., p. V1: 573

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight
135.21 g/molcalculated · reference compound database
Average mass of one molecule, from reference compound database.
Exact mass
135.104799419 Dacalculated · reference compound database
Mass of the most common isotopic form.
XLogP3
2.8calculated · reference compound database
Estimated oil/water partition, computed by reference compound database.
Polar surface area
3.2 Ųcalculated · reference compound database
Polar surface area as computed by reference compound database.
Complexity
90calculated · reference compound database
A rough measure of how intricate the structure is.
H-bond donors
0calculated · reference compound database
H-bond acceptors
1calculated · reference compound database
logP
2.061calculated · chemistry engine
Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area
3.24 Ųcalculated · chemistry engine
Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors
0calculated · chemistry engine
Atoms that can donate a hydrogen bond.
H-bond acceptors
1calculated · chemistry engine
Atoms that can accept a hydrogen bond.
Rotatable bonds
1calculated · chemistry engine
Single bonds the molecule can freely twist around.
Molar refractivity
45.506 cm³/molcalculated · chemistry engine
Relates to the molecule's polarisability.
Fraction sp³ carbons
0.3333calculated · chemistry engine
Share of carbon atoms with tetrahedral bonding.
QED drug-likeness
0.5694calculated · chemistry engine
Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded
10
Total atoms, hydrogen included
23
Rings
1
Aromatic rings
1
Stereocentres
0
Formal charge
0

Functional groups

  • Tertiary aromatic amine

    A nitrogen bonded to an aromatic ring and two other carbons.

  • Aromatic ring

    A flat six-membered ring with delocalised electrons.

Matched by structural pattern, not by a measurement.

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Dimethyl-p-toluidine yet.

Other names for it

The systematic name on this record is N,N,4-trimethylaniline.

The sources also call it N,N-Dimethyl-p-toluidine, Benzenamine, N,N,4-trimethyl-, N,N-Dimethyl-4-methylaniline, Dimethyl-4-toluidine, N,N-Dimethyl-p-tolylamine, p,N,N-Trimethylaniline, p-(Dimethylamino)toluene, p-Methyl-N,N-dimethylaniline, p-Toluidine, N,N-dimethyl-, S8XC5939VU, dimethyl-para-toluidine.

Structurally related

Nothing structurally close to Dimethyl-p-toluidine has a page here yet.

Where these values came from

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.