Glyoxal

An aldehyde, C2H2O2, 58.036 g/mol. Boiling point 51 °C at 776 mm Hg, melting point 59 °F, as published.

verified recordOrganic — aldehyde8 measured properties

Identifiers

Molecular formula: C₂H₂O₂
Molecular weight: 58.036 g/mol
Exact mass: 58.005479 g/mol
IUPAC name: oxaldehyde
SMILES: O=CC=O
InChI: InChI=1S/C2H2O2/c3-1-2-4/h1-2H
InChIKey: LEQAOMBKQFMDFZ-UHFFFAOYSA-N

Open in ReactionLens Use in reaction prediction

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point: 124 °F at 776 mmHg (NTP, 1992)measured · CAMEO Chemicals; 51 °C at 776 mm Hgmeasured · Hazardous Substances Data Bank (HSDB)
Melting Point: 59 °F (NTP, 1992)measured · CAMEO Chemicals; 15 °C for pure glyoxal and approximately -10 °C for the 40% solutionmeasured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
Density: 1.29 at 68 °F (liquid,40% solution) (USCG, 1999) - Denser than water; will sinkmeasured · CAMEO Chemicals; 1.14 g/cu cm at 20 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Solubility: greater than or equal to 100 mg/mL at 72 °F (NTP, 1992)measured · CAMEO Chemicals; Sol in anhydrous solventsmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure: 18 mmHg at 68 °F (NTP, 1992)measured · CAMEO Chemicals; 255 mm Hg at 25 °C /extrapolated/measured · Hazardous Substances Data Bank (HSDB)
LogP: -0.85measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Flash Point: 428 °F (NTP, 1992)measured · CAMEO Chemicals; 428 °Fmeasured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
Refractive Index: Index of refraction = 1.3826 at 20 °Cmeasured · O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. 13th Edition, Whitehouse Station, NJ: Merck and Co., Inc., 2001., p. 803

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight: 58.04 g/molcalculated · reference compound database; Average mass of one molecule, from reference compound database.
Exact mass: 58.005479302 Dacalculated · reference compound database; Mass of the most common isotopic form.
XLogP3: -0.4calculated · reference compound database; Estimated oil/water partition, computed by reference compound database.
Polar surface area: 34.1 Å²calculated · reference compound database; Polar surface area as computed by reference compound database.
Complexity: 25calculated · reference compound database; A rough measure of how intricate the structure is.
H-bond donors: 0calculated · reference compound database
H-bond acceptors: 2calculated · reference compound database
logP: -0.6158calculated · chemistry engine; Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area: 34.14 Å²calculated · chemistry engine; Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors: 0calculated · chemistry engine; Atoms that can donate a hydrogen bond.
H-bond acceptors: 2calculated · chemistry engine; Atoms that can accept a hydrogen bond.
Rotatable bonds: 1calculated · chemistry engine; Single bonds the molecule can freely twist around.
Molar refractivity: 12.128 cm³/molcalculated · chemistry engine; Relates to the molecule's polarisability.
Fraction sp³ carbons: 0calculated · chemistry engine; Share of carbon atoms with tetrahedral bonding.
QED drug-likeness: 0.2973calculated · chemistry engine; Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

O Oxygen2 atoms · 55.1% by mass
C Carbon2 atoms · 41.4% by mass
H Hydrogen2 atoms · 3.5% by mass

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded: 4
Total atoms, hydrogen included: 6
Rings: 0
Aromatic rings: 0
Stereocentres: 0
Formal charge: 0

Functional groups

Aldehyde
A carbonyl at the end of a chain, bonded to hydrogen.

Matched by structural pattern, not by a measurement.

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Glyoxal yet.

Other names for it

The systematic name on this record is oxaldehyde.

The sources also call it Ethanedial, oxaldehyde, Oxalaldehyde, 1,2-Ethanedione, Biformyl, Diformyl, Biformal, Oxal, Glyoxylaldehyde, Diformal, Ethanedione.

Structurally related

Nothing structurally close to Glyoxal has a page here yet.

Seen alongside it in reaction records

Molecules that appear in the same recorded reactions as Glyoxal. This says nothing about structure: most of them are the bases, solvents, ligands and catalysts the chemistry needed, and they are here because somebody put them in the same flask.

(4-Fluorophenyl)hydrazine

used as a reactant

C₆H₇FN₂, 126.134 g/mol.

Where these values came from

reference compound database7860
compound record
chemistry engine
structure perception

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.