M-Phenylenediamine

An aromatic amine, C6H8N2, 108.144 g/mol. Boiling point 284-287 °C, melting point 145 to 147 °F, as published.

verified recordOrganic — aromatic amine8 measured properties

Identifiers

Molecular formula: C₆H₈N₂
Molecular weight: 108.144 g/mol
Exact mass: 108.068748 g/mol
IUPAC name: benzene-1,3-diamine
SMILES: Nc1cccc(N)c1
InChI: InChI=1S/C6H8N2/c7-5-2-1-3-6(8)4-5/h1-4H,7-8H2
InChIKey: WZCQRUWWHSTZEM-UHFFFAOYSA-N

Open in ReactionLens Use in reaction prediction

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point: 540 to 543 °F at 760 mmHg (NTP, 1992)measured · CAMEO Chemicals; 284-287 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Melting Point: 145 to 147 °F (NTP, 1992)measured · CAMEO Chemicals; 145-147 °Fmeasured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
Density: 1.0696 at 136 °F (NTP, 1992) - Denser than water; will sinkmeasured · CAMEO Chemicals; 1.0096 g/cu cm at 58 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Solubility: less than 1 mg/mL at 66 °F (NTP, 1992)measured · CAMEO Chemicals; SOL IN WATER, METHANOL, ETHANOL, CHLOROFORM, ACETONE, DIMETHYLFORMAMIDE, METHYL ETHYL KETONE, DIOXANE; SLIGHTLY SOL IN ETHER, CARBON TETRACHLORIDE, ISOPROPANOL, DIBUTYL PHTHALATE. VERY SLIGHTLY SOL INmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure: 1 mmHg at 211.6 °F ; 0.0018 mmHg at 77 °F (NTP, 1992)measured · CAMEO Chemicals; 0.0018 [mmHg]measured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
LogP: log Kow = -0.33measured · Hazardous Substances Data Bank (HSDB); -0.33measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Flash Point: 280 °F (NTP, 1992)measured · CAMEO Chemicals; 187 °C c.c.measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Refractive Index: INDEX OF REFRACTION: 1.6339 AT 58 °C/Dmeasured · Lide, D.R. (ed.). CRC Handbook of Chemistry and Physics. 76th ed. Boca Raton, FL: CRC Press Inc., 1995-1996., p. 3-37

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight: 108.14 g/molcalculated · reference compound database; Average mass of one molecule, from reference compound database.
Exact mass: 108.068748264 Dacalculated · reference compound database; Mass of the most common isotopic form.
XLogP3: -0.3calculated · reference compound database; Estimated oil/water partition, computed by reference compound database.
Polar surface area: 52 Å²calculated · reference compound database; Polar surface area as computed by reference compound database.
Complexity: 64calculated · reference compound database; A rough measure of how intricate the structure is.
H-bond donors: 2calculated · reference compound database
H-bond acceptors: 2calculated · reference compound database
logP: 0.851calculated · chemistry engine; Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area: 52.04 Å²calculated · chemistry engine; Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors: 2calculated · chemistry engine; Atoms that can donate a hydrogen bond.
H-bond acceptors: 2calculated · chemistry engine; Atoms that can accept a hydrogen bond.
Rotatable bonds: 0calculated · chemistry engine; Single bonds the molecule can freely twist around.
Molar refractivity: 35.2668 cm³/molcalculated · chemistry engine; Relates to the molecule's polarisability.
Fraction sp³ carbons: 0calculated · chemistry engine; Share of carbon atoms with tetrahedral bonding.
QED drug-likeness: 0.4839calculated · chemistry engine; Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

C Carbon6 atoms · 66.6% by mass
N Nitrogen2 atoms · 25.9% by mass
H Hydrogen8 atoms · 7.5% by mass

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded: 8
Total atoms, hydrogen included: 16
Rings: 1
Aromatic rings: 1
Stereocentres: 0
Formal charge: 0

Functional groups

Primary aromatic amine
An –NH2 group attached directly to an aromatic ring, as in aniline. Much less basic than an alkyl amine, because the lone pair is delocalised into the ring.
Aromatic ring
A flat six-membered ring with delocalised electrons.

Matched by structural pattern, not by a measurement.

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves M-Phenylenediamine yet.

Other names for it

The systematic name on this record is benzene-1,3-diamine.

The sources also call it benzene-1,3-diamine, 1,3-Phenylenediamine, 1,3-BENZENEDIAMINE, 1,3-Diaminobenzene, 3-Aminoaniline, m-Diaminobenzene, m-Aminoaniline, meta-Phenylenediamine, Developer C, Developer 11, 3-Phenylenediamine.

Structurally related

Nothing structurally close to M-Phenylenediamine has a page here yet.

Where these values came from

reference compound database7935
compound record
chemistry engine
structure perception

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.