Skip to the content
Browse the library

Phthalaldehyde

An aromatic aldehyde, C8H6O2, 134.134 g/mol. Boiling point 83 °C at 0.8 mm Hg, melting point 55.8 °C, as published.

verified record, Organic — aromatic aldehyde, 7 measured properties

Identifiers

Molecular formula
C₈H₆O₂
Molecular weight
134.134 g/mol
Exact mass
134.036779 g/mol
IUPAC name
phthalaldehyde
SMILES
O=Cc1ccccc1C=O
InChI
InChI=1S/C8H6O2/c9-5-7-3-1-2-4-8(7)6-10/h1-6H
InChIKey
ZWLUXSQADUDCSB-UHFFFAOYSA-N

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point
BP: 83 °C at 0.8 mm Hgmeasured · Hazardous Substances Data Bank (HSDB)
Melting Point
55.8 °Cmeasured · Hazardous Substances Data Bank (HSDB)
55.8 °Cmeasured · ILO-WHO International Chemical Safety Cards (ICSCs)
Density
Density (at 20 °C): 1.13 g/cm³measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Solubility
In water, 5 g/100 mL at 20 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Very soluble in ethyl ether, ethanolmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure
0.0052 [mmHg]measured · Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
0.0052 mm Hg at 21 °C (0.69 Pa)measured · Hazardous Substances Data Bank (HSDB)
LogP
log Kow = 0.51measured · Hazardous Substances Data Bank (HSDB)
0.99 (30 °C)measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Flash Point
132 °C (270 °F) - closed cupmeasured · Hazardous Substances Data Bank (HSDB)
132 °C c.c.measured · ILO-WHO International Chemical Safety Cards (ICSCs)

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight
134.13 g/molcalculated · reference compound database
Average mass of one molecule, from reference compound database.
Exact mass
134.03677943 Dacalculated · reference compound database
Mass of the most common isotopic form.
XLogP3
1.2calculated · reference compound database
Estimated oil/water partition, computed by reference compound database.
Polar surface area
34.1 Ųcalculated · reference compound database
Polar surface area as computed by reference compound database.
Complexity
115calculated · reference compound database
A rough measure of how intricate the structure is.
H-bond donors
0calculated · reference compound database
H-bond acceptors
2calculated · reference compound database
logP
1.3116calculated · chemistry engine
Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area
34.14 Ųcalculated · chemistry engine
Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors
0calculated · chemistry engine
Atoms that can donate a hydrogen bond.
H-bond acceptors
2calculated · chemistry engine
Atoms that can accept a hydrogen bond.
Rotatable bonds
2calculated · chemistry engine
Single bonds the molecule can freely twist around.
Molar refractivity
37.217 cm³/molcalculated · chemistry engine
Relates to the molecule's polarisability.
Fraction sp³ carbons
0calculated · chemistry engine
Share of carbon atoms with tetrahedral bonding.
QED drug-likeness
0.5713calculated · chemistry engine
Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded
10
Total atoms, hydrogen included
16
Rings
1
Aromatic rings
1
Stereocentres
0
Formal charge
0

Functional groups

  • Aldehyde

    A carbonyl at the end of a chain, bonded to hydrogen.

  • Aromatic ring

    A flat six-membered ring with delocalised electrons.

Matched by structural pattern, not by a measurement.

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Phthalaldehyde yet.

Other names for it

The systematic name on this record is phthalaldehyde.

The sources also call it o-Phthalaldehyde, o-Phthaldialdehyde, 1,2-Benzenedicarboxaldehyde, Phthalic aldehyde, ortho-Phthalaldehyde, benzene-1,2-dicarbaldehyde, Phthalic dialdehyde, Phthalic dicarboxaldehyde, Phthalyldicarboxaldehyde, Phthalaldialdehyde, ortho Phthalaldehyde.

Structurally related

Nothing structurally close to Phthalaldehyde has a page here yet.

Where these values came from

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.