Selenium Dioxide

An inorganic compound, O2Se, 110.958 g/mol. Boiling point 599 °F at 760 mmHg (sublimes), melting point 340 °C under pressure, as published.

verified recordInorganic compound6 measured properties

Identifiers

Molecular formula: O₂Se
Molecular weight: 110.958 g/mol
Exact mass: 111.906351 g/mol
IUPAC name: selenium dioxide
SMILES: O=[Se]=O
InChI: InChI=1S/O2Se/c1-3-2
InChIKey: JPJALAQPGMAKDF-UHFFFAOYSA-N

Open in ReactionLens Use in reaction prediction

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point: 599 °F at 760 mmHg (sublimes) (USCG, 1999)measured · CAMEO Chemicals
Melting Point: 340 °C under pressuremeasured · Hazardous Substances Data Bank (HSDB)
Density: 3.95 at 68 °F (USCG, 1999) - Denser than water; will sinkmeasured · CAMEO Chemicals; 3.954 at 15 °C/15 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Solubility: Soluble in concentrated sulfuric acidmeasured · Hazardous Substances Data Bank (HSDB); Solubility (parts/100 parts solvent): 10.16 in methanol at 11.8 °C; 6.67 in 93% ethanol at 14 °C; 4.35 in acetone at 15.3 °C; 1.11 in acetic acid at 13.9 °Cmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure: 12.5 mm Hg at 70 °C; 20.2 mm Hg at 94 °C; 39.0 mm Hg at 181 °C; 760 mm Hg at 315 °C; 848 mm Hg at 320 °Cmeasured · Hazardous Substances Data Bank (HSDB); Vapor pressure, kPa at 70 °C: 1.65measured · ILO-WHO International Chemical Safety Cards (ICSCs)
Refractive Index: Index of refraction: less than 1.76 at 20 °C/Dmeasured · O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006., p. 1456

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight: 110.97 g/molcalculated · reference compound database; Average mass of one molecule, from reference compound database.
Exact mass: 111.90635 Dacalculated · reference compound database; Mass of the most common isotopic form.
Polar surface area: 34.1 Å²calculated · reference compound database; Polar surface area as computed by reference compound database.
Complexity: 18calculated · reference compound database; A rough measure of how intricate the structure is.
H-bond donors: 0calculated · reference compound database
H-bond acceptors: 2calculated · reference compound database
logP: -0.6184calculated · chemistry engine; Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area: 34.14 Å²calculated · chemistry engine; Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors: 0calculated · chemistry engine; Atoms that can donate a hydrogen bond.
H-bond acceptors: 2calculated · chemistry engine; Atoms that can accept a hydrogen bond.
Rotatable bonds: 0calculated · chemistry engine; Single bonds the molecule can freely twist around.
Molar refractivity: 7.127 cm³/molcalculated · chemistry engine; Relates to the molecule's polarisability.
Fraction sp³ carbons: 0calculated · chemistry engine; Share of carbon atoms with tetrahedral bonding.
QED drug-likeness: 0.3902calculated · chemistry engine; Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

Se Selenium1 atom · 71.2% by mass
O Oxygen2 atoms · 28.8% by mass

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded: 3
Total atoms, hydrogen included: 3
Rings: 0
Aromatic rings: 0
Stereocentres: 0
Formal charge: 0

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Selenium Dioxide yet.

Other names for it

The systematic name on this record is selenium dioxide.

The sources also call it Selenious anhydride, Selenium oxide (SeO2), Selenium dioxide dimer, Selenous acid anhydride, Selenium oxide (Se2O4), Selenium(IV) dioxide (1:2), Selenium oxide (1:2), 9N3UK29E57, DTXSID4021264, NSC-56753, Oxide, Selenium.

Structurally related

Nothing structurally close to Selenium Dioxide has a page here yet.

Seen alongside it in reaction records

Molecules that appear in the same recorded reactions as Selenium Dioxide. This says nothing about structure: most of them are the bases, solvents, ligands and catalysts the chemistry needed, and they are here because somebody put them in the same flask.

1,4-Dioxane

used as a reactant

C₄H₈O₂, 88.106 g/mol.

1,2,3,4-Tetrahydroisoquinoline

used as a reactant

C₉H₁₁N, 133.194 g/mol.

(4-ethoxy-1H-pyrazolo[3,4-b]pyridin-5-yl)-pyridin-3-ylmethanone

formed as a product

C₁₄H₁₂N₄O₂, 268.276 g/mol.

Where these values came from

reference compound database24007
compound record
chemistry engine
structure perception

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.