Thiram
C6H12N2S4, 240.444 g/mol. Its structure, the values that were measured, the values that were calculated, and where each one came from.
Identifiers
- Molecular formula
- C₆H₁₂N₂S₄
- Molecular weight
- 240.444 g/mol
- Exact mass
- 239.988332 g/mol
- CN(C)C(=S)SSC(=S)N(C)C
- InChI=1S/C6H12N2S4/c1-7(2)5(9)11-12-6(10)8(3)4/h1-4H3
- KUAZQDVKQLNFPE-UHFFFAOYSA-N
Measured properties
Values somebody obtained from a sample and published. Where two sources report the same property they are both shown, in the units each used — a disagreement between them is information, and averaging it away would be inventing a number neither one gave.
- Boiling Point
- 264 °F at 20 mmHg (NTP, 1992)
- 129 °C at 20 mm Hg
- at 2.6kPa: 129 °C
- 264 °F at 20 mmHg
- Decomposes
- Melting Point
- 311 to 313 °F (NTP, 1992)
- 155-156 °C
- MP: 146 °C /Commercial grade/
- 155-156 °C
- 312 °F
- 156 °C
- 312 °F
- Flash Point
- 280 °F (NTP, 1992)
- 89 °C (192 °F) (closed cup)
- 89 °C c.c.
- 280 °F
- Solubility
- less than 1 mg/mL at 72 °F (NTP, 1992)
- Solubility in alcohol and in ether less than 0.2%; solubility in acetone 1.2%; in benzene 2.5%.
- Sol in carbon disulfide
- Solubility in ethanol <10 g/L at 25 °C, acetone 80 g/L at 25 °C, chloroform 230 g/L at 25 °C, hexane 0.04 g/L at 20 °C; dichloromethane 170 g/L at 20 °C, toluene 18 g/L at 20 °C, isopropanol 0.7 g/L at 20 °C.
- In water, 30 mg/L at 25 °C
- Solubility in water: none
- 0.003%
- Density
- 1.43 at 68 °F (USCG, 1999) - Denser than water; will sink
- 1.3 g/cu cm
- 1.3 g/cm³
- 1.43
- 1.3 @25 °C
- 1.29
- Vapor Pressure
- 0 mmHg at 68 °F approximately (NTP, 1992)
- 0.0000172 [mmHg]
- 1.72X10-5 mm Hg at 25 °C
- Vapor pressure at 20 °C: negligible
- 0.000008 mmHg
- 0.000017 [mm Hg] @25 °C
- 0.000008 mmHg
- LogP
- log Kow = 1.73
- 1.82
- 1.89
Calculated properties
Derived from the structure rather than from a sample. These are reproducible and they are not measurements: a calculated partition coefficient and a measured one can differ by a long way, and where both exist they are listed apart on purpose.
- logP
- 2.0608
- Topological polar surface area
- 6.48 Ų
- H-bond donors
- 0
- H-bond acceptors
- 4
- Rotatable bonds
- 0
- Molar refractivity
- 67.752 cm³/mol
- Fraction sp³ carbons
- 0.6667
- QED drug-likeness
- 0.4689
What it is made of
Structure
- Heavy atoms, hydrogen excluded
- 12
- Total atoms, hydrogen included
- 24
- Rings
- 0
- Aromatic rings
- 0
- Stereocentres
- 0
- Formal charge
- 0
The molecule in three dimensions
The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.
Reactions it appears in
Other names for it
The sources also call it Tetramethylthiuram disulfide, Thiuram, TMTD, Rezifilm, Pomarsol, Thirame, Arasan, Fernasan, Nobecutan, Normersan, Aapirol, Puralin.
Structurally related
Molecules sharing this formula, or whose fingerprint is at least 40% similar to this one. Similarity is Tanimoto on Morgan fingerprints over this library only — it is a measure of structural overlap, not of how alike they behave.
Where these values came from
chemistry engine
What this page does not claim
The identifiers are what the source record holds, copied rather than recomputed. Measured values are reported as their source gave them, units and all; calculated values are marked as calculated and are not measurements. Where a field is absent the page says so, because a blank cell reads as a zero and a guessed value reads as a fact.
Nothing here is a hazard assessment, a purity statement or advice about handling a sample. A flash point quoted from a safety database is a number somebody published, not a judgement by us about whether this molecule is safe for what you intend.