Titanium

An element / simple molecule, Ti, 47.867 g/mol. Boiling point 3287 °C, melting point 1668 °C, as published.

verified recordElement / simple molecule5 measured properties

Identifiers

Molecular formula: Ti
Molecular weight: 47.867 g/mol
Exact mass: 47.947946 g/mol
IUPAC name: titanium
SMILES: [Ti]
InChI: InChI=1S/Ti
InChIKey: RTAQQCXQSZGOHL-UHFFFAOYSA-N

Open in ReactionLens Use in reaction prediction

Measured properties

Published measurements, each with its source. Two readings of one property are both shown, in the units each used.

Boiling Point: 3287 °Cmeasured · Hazardous Substances Data Bank (HSDB); 3287 °C @760 [mm Hg]measured · PAC Chemical Database, U.S. Department of Energy
Melting Point: 1668 °Cmeasured · Hazardous Substances Data Bank (HSDB); 1668 °Cmeasured · PAC Chemical Database, U.S. Department of Energy
Density: 4.506 @ 20 °Cmeasured · Hazardous Substances Data Bank (HSDB); 4.506 @25 °Cmeasured · PAC Chemical Database, U.S. Department of Energy
Solubility: INSOL IN WATER; SOL IN DILUTE ACIDSmeasured · Hazardous Substances Data Bank (HSDB)
Vapor Pressure: 1.0X10-79 atm @ 25 °Cmeasured · Hazardous Substances Data Bank (HSDB)

Calculated properties

Derived from the structure, not from a sample; kept apart from the measurements above.

Molecular weight: 47.867 g/molcalculated · reference compound database; Average mass of one molecule, from reference compound database.
Exact mass: 47.9479407 Dacalculated · reference compound database; Mass of the most common isotopic form.
Polar surface area: 0 Å²calculated · reference compound database; Polar surface area as computed by reference compound database.
Complexity: 0calculated · reference compound database; A rough measure of how intricate the structure is.
H-bond donors: 0calculated · reference compound database
H-bond acceptors: 0calculated · reference compound database
logP: -0.0025calculated · chemistry engine; Estimated preference for oil over water. Higher means more oil-like.
Topological polar surface area: 0 Å²calculated · chemistry engine; Surface area from polar atoms; relates to how easily a molecule crosses membranes.
H-bond donors: 0calculated · chemistry engine; Atoms that can donate a hydrogen bond.
H-bond acceptors: 0calculated · chemistry engine; Atoms that can accept a hydrogen bond.
Rotatable bonds: 0calculated · chemistry engine; Single bonds the molecule can freely twist around.
Molar refractivity: 0 cm³/molcalculated · chemistry engine; Relates to the molecule's polarisability.
Fraction sp³ carbons: 0calculated · chemistry engine; Share of carbon atoms with tetrahedral bonding.
QED drug-likeness: 0.3377calculated · chemistry engine; Quantitative estimate of drug-likeness (0–1).

What it is made of

Elements

Ti Titanium1 atom · 100.0% by mass

Percentages are of the molecular weight above, worked out the same way the molar mass calculator does it.

Structure

Heavy atoms, hydrogen excluded: 1
Total atoms, hydrogen included: 1
Rings: 0
Aromatic rings: 0
Stereocentres: 0
Formal charge: 0

The molecule in three dimensions

Rotate and inspect the atoms. Loaded only when you ask, so the page stays light.

The drawing above is a diagram of what is bonded to what. A molecule is not flat, and the model here is one low-energy shape generated from the connectivity — useful for seeing which groups can reach each other, and not a measured structure. A real sample is a population of conformations, interconverting.

Reactions it appears in

No documented reaction with a written procedure and a source involves Titanium yet.

Other names for it

The systematic name on this record is titanium.

The sources also call it CP Titanium, Titanium VT1, C.P. titanium, Contimet 30, Titanium 50A, Jistp28, Titanium A-40, Titanium-125, Titanium element, Titan vt 1-1, Titanium (dry powder).

Structurally related

Nothing structurally close to Titanium has a page here yet.

Seen alongside it in reaction records

Molecules that appear in the same recorded reactions as Titanium. This says nothing about structure: most of them are the bases, solvents, ligands and catalysts the chemistry needed, and they are here because somebody put them in the same flask.

1-(1-Naphthyl)-2-naphthol

formed as a product

C₂₀H₁₄O, 270.331 g/mol.

(T-4)-Dichlorobis(2-propanolato)titanium

used as a reactant

C₆H₁₄Cl₂O₂Ti, 236.949 g/mol.

1,2-Dichloro-4-nitrobenzene

used as a reactant

C₆H₃Cl₂NO₂, 192.001 g/mol.

Where these values came from

reference compound database23963
compound record
chemistry engine
structure perception

compound record.

What this page does not claim

Identifiers are copied from the source record, measured values are reported as published, and calculated values are marked as calculated. Nothing here is a hazard, purity or handling assessment — how the library is checked.